Stuttgart. The new Porsche 911 GT3 Cup is entering the 2008 motorsport season with engine output increased to 420 bhp. The car will be raced in the Porsche Mobil1 Supercup, the world's fastest international brand trophy, and worldwide in national Porsche Carrera Cups and GT3 Cup Challenges. 265 units of this production-based racing car developed in Weissach will be built on Porsche's production line in Stuttgart-Zuffenhausen, marking a new record for a car of this category.
The most significant modification compared with last year's model is the new rear end following the design of the production model. Air venting slits ensure better dissipation of heat at the rear. The 3.6-litre six-cylinder boxer engine developed in Weissach is also based on the street-legal GT3 and develops maximum output of 420 bhp, 20 horsepower more than on the previous model. The sequential six-speed transmission with interruption of engine power enables the driver to shift up under full throttle without disengaging the clutch. The transmission itself has been optimised and the gear ratios adjusted to the characteristics of the engine. Weighing 1,150 kg in race trim, the new 911 GT3 Cup has a power-to-weight ratio of 2.7 kg per horsepower.
The 26 units of the 911 GT3 Cup built for the Porsche Mobil1 Supercup feature a special exhaust system with an even more striking sound pattern reminiscent of the Formula 1 racing scene as well as PCCB Porsche Ceramic Composite Brakes as exclusive highlights. Compared with conventional brake discs, PCCB reduces unsprung masses by 20 kg and sets new standards in terms of responsiveness, resistance to fading, and a long service life. The racing cars entered worldwide in the Carrera Cup feature a modified exhaust system and steel brake discs.
Porsche's Racing Department in Weissach is responsible for the fine-tuning and running in the 911 GT3 Cup cars. Deliveries will be directly from Weissach, depending on the country of destination and the schedules to be observed. While the cars for the Carrera Cup New Zealand have already been shipped, delivery of the racing cars for the Porsche Mobil1 Supercup and the Carrera Cup Germany is scheduled for early March 2008.
Specifications
Power Unit
Water-cooled six-cylinder boxer; 3,598 cc; stroke 76.4 mm (3.01'); bore 99.98 mm (3.94'); max output 420 bhp (309 kW); max torque 420 Nm (310 lb-ft); max engine speed 8,400 rpm; four-valve technology; dry sump lubrication; two-stage resonance intake distributor; central air intake; electronic MS 3.1 engine management; fuel injection (multi-point, sequential); fuel grade 98 RON premium plus unleaded; racing exhaust with fully controlled catalytic converter (400 cells); rear silencer with centrally mounted double tailpipe; special exhaust tailpipes for the Porsche Mobil1 Supercup.
Monocoque body made of hot-galvanised steel; aerodynamically optimised front end with front spoiler; doors with side frames made of CFP and reinforced plastic door panels; rear lid with adjustable rear wing made of CFP; rear body panels made of CFP; air jack; welded-in rollcage; bucket-type racing seat (on driver's side only) with flame-resistant seat cover; six-point seat belt adapted for use of the HANS Head and Neck Support; electric fire-extinguishing system; 90-litre fuel tank; safety bar holding the battery in position.
Chassis and Suspension
Front: McPherson spring strut axle; Sachs gas pressure dampers; double coil springs (main and ancillary spring); front axle arms adjustable for camber; adjustable sword-type anti-roll bar; reinforced front axle crossbar with six-point fastening and double clamping; power steering with electrohydraulic pressure supply.
Rear: Multi-arm axle with rigidly mounted axle subframe; Sachs gas pressure dampers; double coil springs (main and ancillary spring); rear axle track arm adjustable for camber; rear axle tiebar reinforced and infinitely adjustable; adjustable sword-type anti-roll bar.
Front: Single-piece six-piston aluminium fixed callipers; Porsche Ceramic Composite Brakes (PCCB), inner-vented, 380 mm (14.96') in diameter; racing brake pads.
Rear: Single-piece four-piston aluminium fixed callipers; Porsche Ceramic Composite Brakes (PCCB), inner-vented, 350 mm (13.78') in diameter; racing brake pads.
Wheels/Tyres
Front: Three-piece BBS light-alloy wheels (9J x 18); ET 43 with central locking;
Michelin rain tyres (24/64-18).
Rear: Three-piece BBS light-alloy wheels (11J x 18); ET 30 with central locking;
Michelin rain tyres (27/68-18).
Electrical System
Motec display with integrated data recording; battery: 12 volt, 50 Ah, 90 Ah alternator.
Weight
Approx 1,150 kg (1,130 kg with PCCB). Source - Porsche New 420 bhp Porsche 911 GT3 Cup
Stuttgart. The new Porsche 911 GT3 Cup is entering the 2008 motorsport season with engine output increased to 420 bhp. The car will be raced in the Porsche Mobil1 Supercup, the world's fastest international brand trophy, and worldwide in national Porsche Carrera Cups and GT3 Cup Challenges. 265 units of this production-based racing car developed in Weissach will be built on Porsche's production line in Stuttgart-Zuffenhausen, marking a new record for a car of this category.
The most significant modification compared with last year's model is the new rear end following the design of the production model. Air venting slits ensure better dissipation of heat at the rear. The 3.6-litre six-cylinder boxer engine developed in Weissach is also based on the street-legal GT3 and develops maximum output of 420 bhp, 20 horsepower more than on the previous model. The sequential six-speed transmission with interruption of engine power enables the driver to shift up under full throttle without disengaging the clutch. The transmission itself has been optimised and the gear ratios adjusted to the characteristics of the engine. Weighing 1,150 kg in race trim, the new 911 GT3 Cup has a power-to-weight ratio of 2.7 kg per horsepower.
The 26 units of the 911 GT3 Cup built for the Porsche Mobil1 Supercup feature a special exhaust system with an even more striking sound pattern reminiscent of the Formula 1 racing scene as well as PCCB Porsche Ceramic Composite Brakes as exclusive highlights. Compared with conventional brake discs, PCCB reduces unsprung masses by 20 kg and sets new standards in terms of responsiveness, resistance to fading, and a long service life. The racing cars entered worldwide in the Carrera Cup feature a modified exhaust system and steel brake discs.
Porsche's Racing Department in Weissach is responsible for the fine-tuning and running in the 911 GT3 Cup cars. Deliveries will be directly from Weissach, depending on the country of destination and the schedules to be observed. While the cars for the Carrera Cup New Zealand have already been shipped, delivery of the racing cars for the Porsche Mobil1 Supercup and the Carrera Cup Germany is scheduled for early March 2008.
Specifications
Power Unit
Water-cooled six-cylinder boxer; 3,598 cc; stroke 76.4 mm (3.01'); bore 99.98 mm (3.94'); max output 420 bhp (309 kW); max torque 420 Nm (310 lb-ft); max engine speed 8,400 rpm; four-valve technology; dry sump lubrication; two-stage resonance intake distributor; central air intake; electronic MS 3.1 engine management; fuel injection (multi-point, sequential); fuel grade 98 RON premium plus unleaded; racing exhaust with fully controlled catalytic converter (400 cells); rear silencer with centrally mounted double tailpipe; special exhaust tailpipes for the Porsche Mobil1 Supercup.
Monocoque body made of hot-galvanised steel; aerodynamically optimised front end with front spoiler; doors with side frames made of CFP and reinforced plastic door panels; rear lid with adjustable rear wing made of CFP; rear body panels made of CFP; air jack; welded-in rollcage; bucket-type racing seat (on driver's side only) with flame-resistant seat cover; six-point seat belt adapted for use of the HANS Head and Neck Support; electric fire-extinguishing system; 90-litre fuel tank; safety bar holding the battery in position.
Chassis and Suspension
Front: McPherson spring strut axle; Sachs gas pressure dampers; double coil springs (main and ancillary spring); front axle arms adjustable for camber; adjustable sword-type anti-roll bar; reinforced front axle crossbar with six-point fastening and double clamping; power steering with electrohydraulic pressure supply.
Rear: Multi-arm axle with rigidly mounted axle subframe; Sachs gas pressure dampers; double coil springs (main and ancillary spring); rear axle track arm adjustable for camber; rear axle tiebar reinforced and infinitely adjustable; adjustable sword-type anti-roll bar.
Source - Mazda Mazda Furai Concept and 2009 RX-8 to Make World Debut at 2008 North American International Auto Show
Mazda Motor Corporation will showcase the world premieres of the Mazda Furai concept vehicle and the heavily revised 2009 Mazda RX-8 sports car at the 2008 North American International Auto Show (NAIAS), to be held in Detroit from Sunday, January 13 through Sunday, January 27, 2008. On the heels of its show-stopping debut at the 2007 Tokyo Motor Show in October, the Mazda Taiki concept vehicle also will make its North American debut, the first time it has been shown outside Japan.
Mazda Furai -- 'Sound of the wind'
Inspired by the fact that, on any given weekend, there are more Mazdas and Mazda-powered cars road-raced in the United States than any other brand, the Mazda Furai (Japanese for 'sound of the wind' and pronounced 'fu-rye') is the sort of car that could only come from a company that incorporates the 'Soul of a Sports Car' into everything it builds, but with an eye toward the future and the environment through the use of 100% ethanol produced in partnership with British Petroleum (BP).
Furai takes Mazda's unique Nagare (Japanese for 'flow') design language a step further as it is translated into a concept car based on an American Le Mans Series (ALMS) racing car. The car utilizes the Courage C65 chassis the company campaigned in the ALMS series only two seasons ago, and the 450-hp three-rotor rotary engine that distinguishes it from anything else on the track.
Says Franz von Holzhausen, Mazda's North American director of design, 'Furai purposely blurs boundaries that have traditionally distinguished street cars from track cars. Historically, there has been a gap between single-purpose racecars and street-legal models -- commonly called supercars
-- that emulate the real racers on the road. Furai bridges that gap like no car has ever done before.'
Mazda's critically acclaimed Nagare design language describes the flow of water, air, people or things moving in one direction. Mazda Nagare is flow, with an insightful and spirited styling, which, in Mazda Furai, invokes a raw, unfettered desire to possess everything this car represents.
2009 Mazda RX-8
Sporting a freshened design, improved handing, acceleration, quality and features, the 2009 Mazda RX-8 continues to be a 'Sports Car like no other,' and shows that the rotary engine is still an important part of Mazda's future.
Since its launch in 2003, the Mazda RX-8 has been hailed as a genuine sports car, but with a totally new, four-door, four-seat format that delivers sports car values, passenger comfort and driving pleasure. Powered by the world's only mass-produced rotary engine, RX-8 is the spiritual successor to the 1967 Cosmo 110S, the world's first twin-rotor production car. With almost two-million rotary engines sold, and the company's legendary win at the 1991 24 Hours of Le Mans -- the only Japanese brand to ever win the endurance racing classic -- the rotary engine is the sole preserve of Mazda.
Mazda Taiki
Making its North American debut, the first time it has been shown outside of Japan where it was hailed as the 'Concept of the Show' by a major enthusiast publication at this year's Tokyo Motor Show, Mazda is eager to show the Mazda Taiki alongside the all-new Mazda Furai.
While Taiki is significant as the fourth of the Nagare-inspired concepts in the series, it is also the third rotary-powered car that will be debuted on the Mazda stand. Mazda is committed to the current and future development and production of the rotary engine, as well as pursuing multiple fuel strategies under its Sustainable Zoom-Zoom plan.
The challenge to create 'a design that visually expresses the flow of air' was inspired by the image of a pair of Hagoromo -- the flowing robes that enable a celestial maiden to fly in Japanese legend -- floating down from the sky.
Inspired by Japanese koinobori -- the decorative 'climbing carp streamers' -- the notion of creating an Air-tube became the concept word for the interior design. In accordance, from the dashboard and seats down to the door trim, the interior space creates the dynamic sensation that the flow of the wind is being visually depicted.
Additionally, Mazda will have a special display of racecars on its stand during the press days, and the full lineup of production cars for consumers to sample for public days.
Headquartered in Irvine, California, Mazda North American Operations oversees the sales, marketing, parts and customer service support of Mazda vehicles in the United States, Canada and Mexico through nearly 900 dealers. Operations in Canada are managed by Mazda Canada, Inc., located in Ontario, Canada, and in Mexico by Mazda Motor de Mexico in Mexico City.
Mitsubishi Motors in Japan revealed an exterior image of the production version of the Lancer Evolution high performance sedan. The image, released in conjunction with a financial results announcement, reveals the subtle exterior details of the forthcoming production model, whose styling direction was first suggested with Concept X (2005 Tokyo Motor Show) and later reinforced with Prototype X (2007 NAIAS). The soon-to-market Lancer Evolution represents the zenith of the Lancer badge's performance development; a rally racing story that began over 30 years ago in the deserts of the Safari Rally, later saw dominance on the WRC stage in the 1990's, and now combines the lessons from competition with high technology to bring an enthusiasts' hero to the streets.
The development concept for the all-new Lancer Evolution¹ specifies a 'next-generation high-performance 4WD global sedan that allows all levels of driver to enjoy the car's speed and handling with ease and in safety'. The new model features Mitsubishi's S-AWC² traction and handling system. This advanced all-wheel-drive system integrates a superior level of drive torque distribution and braking management, making this the best handling Lancer Evolution vehicle of the series. This technology when mated to the new, more rigid Lancer platform results in a Lancer Evolution that is highly responsive, offering intuitive handling and a greater degree of control in addition to outstanding vehicle attitude stability. Other examples of Mitsubishi Motors' latest automotive technology to be featured in the new model include a new lightweight, high-performance 2.0-liter turbocharged MIVEC3 engine with aluminum cylinder block and a 6-speed automated manual transmission that contributes to vehicle's exceptional performance while offering improved fuel economy.
Expect the all-new Lancer Evolution sedan will go on sale in North America in the first quarter of 2008.
Source - Mitsubishi Mitsubishi Motors Corporation announces today that it will launch the Lancer Evolution X high-performance 4WD sedan, newest of the company's legendary vehicles, on October 1 at dealerships throughout Japan. Featuring a new platform, engine, and exterior and interior designs, the totally redesigned 2.0-liter model will carry a tax-inclusive price tag ranging from 2,997,750 to 3,750,600. Models fitted with the Twin Clutch SST transmission are due to be launched towards the end of November.
The development goal for the new Lancer Evolution X was to make the car as fast as possible, while also making it as safe to drive as possible. To that end Lancer Evolution X is loaded with the very latest in automotive engineering technology, including the S-AWC (Super All Wheel Control) vehicle dynamics control system and the newly developed, power-efficient Twin Clutch SST (Sport Shift Transmission). Lancer Evolution X is a new-generation high-performance 4WD sedan that allows a new category of driver access to Mitsubishi's dynamic driving experience by underpinning speed with control, security and safety.
Lancer Evolution X's handsome and aggressive functional design presents an intimidating and exciting aerodynamic exterior suggestive of its superior road performance. This is complemented by a functional interior that encourages the driver to concentrate fully on piloting his machine. Lancer Evolution X uses the front end design identity common to all new Mitsubishi Motors sedans (inverted-slant nose with a trapezoidal grille design) first seen on the new Galant Fortis*. As well as shouting loud the aggressive qualities that mark a high performance sports sedan, the front fascia is crafted for optimum aerodynamic performance.
Lancer Evolution X realizes very high levels of motive and driving performance thanks to its new high-output and lightweight 2.0-liter DOHC MIVEC turbocharged engine with aluminum block, an all-new body and stiffer suspension. Despite its turbocharged pedigree the new model earns a 3-star rating for emissions that are 50% lower than the requirements of the Japanese 2005 standards. And complementing its powerful and clean road performance is the kind of a safety specification one would expect of a new-generation high-performance model: SRS dual-stage airbags for driver and front passenger, SRS knee airbag for driver and adaptive front lighting system (AFS) are all standard equipment on the GSR trim level.
The Twin Clutch SST is a 6-speed automated manual transmission incorporating a dual automated clutch system to deliver lightning-fast, slick shifting for feel-good acceleration; while it also provides high-efficiency power transmission for outstanding fuel economy. In keeping with the higher output and torque developed by the new engine, Lancer Evolution X is offered with a new 5-speed manual transmission that delivers smoother shifting and improved shift feel for those who prefer the joys and more direct control of manual shifting.
All Lancer Evolution X GSR models are fitted with the S-AWC vehicle dynamics control system. The system intelligently manages several component systems to regulate drive torque and braking force at each wheel, reading and reflecting driver intent in real time over a wide range of situations. This allows drivers of all abilities to enjoy sporty driving with peace of mind.
* Lancer / Lancer EX in overseas markets.
1. Model lineup
Sporting the S-AWC and Twin Clutch SST and other cutting-edge automotive technology as well as a more comprehensive functional and convenience equipment specification, the GSR trim level (also available with a 5-speed manual transmission) leads the new Lancer Evolution X lineup. The lineup also continues to offer the RS competition base model, with a less comprehensive and simplified equipment specification to reduce weight to a minimum.
To meet customers' wide-ranging expectations in a high-performance sports sedan, the GSR trim level is available with the following option packages:
# High Performance Package : Raises the bar a notch further in terms of driving performance.
# Stylish Exterior Package : Adds classy dressup elements to the exterior.
# Leather Combination Interior : For a more uptown and comfortable interior.
Also available is the Premium Package that combines all these packages and adds 18-inch BBS lightweight alloy wheels to meld the ultimate in performance with a classy and quality appearance.
2. Exterior
The exterior is crafted with sophisticated and aggressive styling to give the low-and-wide squat stance body an aerodynamically clean profile that flows liquidly from the inverted-slant nose over the roof to the tail end, using wind-tunnel proven aero parts.
Molded around the inverted-slant nose and trapezoidal grille, the aggressive and powerful front fascia features larger air intake openings and new ducting for superior engine cooling and aerodynamics and leaves no doubt as to Lancer Evolution X's high performance.
The engine hood air outlet and fender vents effectively exhaust heat from the engine compartment. Together with the engine hood air scoop that supplies cooling air to the turbocharger these elements give vivid accent to Evolution X's exterior looks.
The oversize rear spoiler — standard on the GSR — uses a twisted-section wing panel with different attack angles at its ends and in the center portion to match the airflow over the body surface.
A large undercover rectifies underbody airflow for better aerodynamics and also improves drivetrain cooling. The underside of the rear bumper employs a diffuser design that helps to exhaust the underbody airflow more effectively and also adds a distinguishing touch to the rear view.
The Stylish Exterior Package option uses a chrome finish for the front grille lattice and beltline molding, body color-keyed fender vents and adds fog lamps to give the exterior a touch of uptown elegance.
The GSR trim level is offered in a lineup of five body colors designed to strongly project a functionally aesthetic image and including a vividly sporty Red Metallic and a new classy and deep-hue Phantom Black Pearl. RS is offered in two body colors, including White Solid which is exclusive to this trim level.
3. Interior
The interior design places emphasis on functional and operational elements to encourage and allow the driver to concentrate on operating his machine while at the same time realizing levels of comfort and quality that expected in a new-generation sports sedan.
Seats are done by Recaro — well-known for providing excellent location, hold, and for alleviating fatigue on longer journeys — with a new full bucket front seat design. The new seats offer additional safety, accommodating the factory-fitted optional SRS side airbag; and comfort, with improved seating feeling, easier exit and entry and a less 'constraining' feeling. The rear seats feature a central armrest with handy cup holders.
Lancer Evolution X uses a small diameter steering wheel designed for smooth operation; its genuine leather wrap provides a positive and comfortable fitment to the hand. For optimum operability the S-AWC mode selector is located on the left spoke. (The selector is located on the shift lever panel on models with the factory-fitted MMCS HDD navigation system option, in which case the steering wheel spokes are used to locate the remote audio controls.)
Lancer Evolution X uses a high-contrast instrumentation cluster providing excellent viewability. A Multi-information Display provides the driver with at-a-glance vehicle status information, including: fuel remaining, Twin Clutch SST mode, and S-AWC operating mode.
The dashboard uses a bowed design with the center panel offset toward the driver that provides more knee space and realizes a functional and comfortable cockpit environment for the driver.
The black interior color scheme uses silver accents on the steering wheel spokes, shift lever panel and other operating controls to impart a look that is sporty and also evoke the feeling of a precision instrument.
The Leather Combination Interior package uses leather combination seat upholstery (genuine leather with Glanluxe*1), doors and floor console lid trimmed in soft synthetic leather and aluminum front scuff plates. The package also boosts sound insulation, making for a classier and more comfortable interior.
*1: An artificial suede-finish leather made by Seiren Co., Ltd.
4. Powertrain
Engine
Lancer Evolution X is powered by a new turbocharged engine that adds a high-performance turbocharger to the 4B11-type 2.0-liter 4-cylinder 16-valve DOHC MIVEC unit used in the Galant Fortis. Developing more power over the full rev range, this engine generates more torque at 422 Nm (43.0 kg-m)/3500 rpm and has better response than its 4G63 predecessor. The new engine is also lighter and returns better environmental performance.
The application of continuously variable valve timing technology (MIVEC) to both intake and exhaust camshafts realizes valve timing optimally matched to engine speed and load to stabilize combustion characteristics and allow the engine to develop more power over the full rev range. It also improves emissions performance. Lancer Evolution X earns a 3-star rating for emissions that are 50% under the Japanese 2005 Emissions Standards levels.
The new engine, excluding auxiliary equipment, is 12 kg lighter than the 4G63 thanks to the use of a die-cast aluminum cylinder block, head cover and chain case.
Using a titanium-aluminum alloy turbine wheel and aluminum alloy compressor wheel, the turbocharger features a shape-optimized compressor wheel that improves boost response and increases low-end and mid-range torque.
The adoption of a rearward facing exhaust manifold layout has, as well as improving exhaust efficiency, allowed the engine to be mounted lower, lowering the center of gravity. Other innovations have reduced intake/exhaust system losses and valvetrain friction, contributing to improved engine performance.
Transmissions
The GSR is available with the new Twin Clutch SST 6-speed automated manual transmission that eliminates the need for a clutch pedal and provides slick, smooth shifting. Twin Clutch SST puts odd (1st, 3rd, 5th) and even (2nd, 4th and 6th) gears on separate input shafts each with its own clutch and, through tight cooperative control with the engine, switches between these clutches to realize seamless and lightning-fast shifting for feel-good acceleration. Because it uses clutches rather than a torque converter to transmit power, Twin Clutch SST allows superior power transmission efficiency with little loss of motive power and returns excellent fuel economy. Twin Clutch SST allows the driver to choose between Autoshift fully automatic shifting and Manual Shift, where the driver can change gears as with a manual transmission. A toggle switch located at the base of the shift selector allows the driver to choose between Normal, Sport and Super Sport modes for the optimum shift scheduling for a wide variety of situations ranging from driving around town to tracing a tight line on a winding road.
Twin Clutch SST models are fitted as standard with steering column-mounted lightweight magnesium paddle shifters that allow the driver to shift manually without taking his hand off the steering wheel.
For drivers who enjoy having more direct control over their machine, the GSR is available with a new 5-speed manual transmission. (The RS is only available with this manual gearbox.) Benefiting from the know-how Mitsubishi Motors has accumulated in the motorsport arena the new manual gearbox features a greater torque capacity to handle the higher torque generated by the new turbocharged engine without growing in size. First to fourth gears use close ratios. 1st gear uses a lower ratio than previously for better standing acceleration while 5th gear uses a higher ratio for more comfortable high-speed cruising. The new transmission uses multi-cone synchronizer rings on all gears for smoother shifting and a more positive shift feel as well as for improved durability.
5. Chassis
Body
Lancer Evolution X's new platform achieves significant increases in body stiffness, with gains in torsional and flexural stiffness of 40% and 60% respectively over Lancer Evolution IX MR. This results in better handling stability and crashworthiness, as well as in improved ride and in reduced vibration and noise, to realize levels of quality and comfort that befit a new-generation sports sedan.
Lancer Evolution X's wider track and longer wheelbase not only create a more spacious living space but also bring improved stability and ride. Other factors contributing to the new model's improved handling include its lower center of gravity stemming from the lower powertrain, and better front/rear weight distribution resulting from the lower engine weight, a front overhang that is 20 mm shorter than on the Lancer Evolution IX MR, and the transfer of the battery to the trunk.
To reduce weight and lower the center of gravity, aluminum is used in the roof panel, front fenders and the rear spoiler frame structure.
Suspension & tires
While based on the MacPherson strut front and multi-link rear suspension arrangement used on previous models in the series, Lancer Evolution X features a revamped suspension layout with wider tracks and 18-inch tires. Geometry optimization and greater stiffness in the mountings maximizes the contact patch and allows S-AWC to perform to its full potential as well as bringing improved straight line stability, cornering and ride.
GSR comes standard with 245/40R18 wide and low-aspect tires on 18-inch Enkei 12-spoke high-rigidity cast alloy wheels. 18-inch BBS lightweight alloy wheels are also available as a factory-fitted option for GSR and add a distinctive custom touch with a luster finish.
GSR comes standard with brembo 18-inch front and 17-inch rear ventilated disc brakes. The increased disc size improves stopping power and fade resistance as well as improving brake pedal feel.
The factory-fitted High Performance Package comprises the Bilstein single tube shock absorbers and Eibach coil springs used on Lancer Evolution IX MR. It also includes brembo 2-piece disc brakes that realize a saving of 1.3 kg at each wheel and high performance tires with stiffer walls and better grip. This package brings further improvements in grip, steering response, stability and cornering.
4WD system (S-AWC)
The GSR trim level comes with Mitsubishi Motors' own 4WD vehicle dynamics control system S-AWC (Super All Wheel Control) standard. For Lancer Evolution X, Active Stability Control (ASC) has been added to the ACD*2, AYC*3 and Sport ABS*4 component systems featured in previous Lancer Evolution. S-AWC uses integrated management of these systems to exert high-precision control on drive torque and brake force at each wheel to enhance cornering and stability under all conditions from everyday driving to emergency evasion; thereby producing vehicle behavior that faithfully reflects driver intent. S-AWC offers three operating modes — TARMAC for dry, paved surfaces; GRAVEL for wet or unmade surfaces, and SNOW for snow covered surfaces — allowing the driver to select the mode best suited to current road surface conditions and realize greater stability.
*2: ACD (Active Center Differential)
The Active Center Differential uses an electronically-controlled hydraulic multi-plate clutch to optimize front/rear wheel torque split and thereby produce the best balance between traction and steering response.
*3: AYC (Active Yaw Control)
AYC uses a torque transfer mechanism in the rear differential to control rear wheel torque differential for different driving conditions and so limit the yaw moment that acts on the vehicle body and thus enhance cornering performance. AYC now features yaw rate feedback control using a yaw rate sensor to more accurately determine the cornering dynamics on a real-time basis. And the addition of braking force control allows the system to realize vehicle behavior that more closely mirrors driver intent. Posted on conceptcarz.com.
*4: Sport ABS (Sport Anti-lock Brake System)
ABS allows the driver to maintain directional control and keeps the vehicle stable by preventing the wheels from locking under heavy braking or when braking on slippery surfaces. The addition of yaw rate sensors and brake pressure sensors to the Sport ABS system has improved braking performance through corners.
*5: Active Stability Control (ASC)
The ASC system stabilizes vehicle attitude while maintaining optimum traction by regulating engine power and the braking force at each wheel. ASC elevates vehicle stability by suppressing skidding in an emergency evasion maneuver or as the result of other sudden steering inputs. It also improves traction under acceleration by preventing the driving wheels from spinning on slippery surfaces.
6. Peace of mind / Safety specifications
Standard on GSR are driver and front passenger SRS dual-stage airbags (driver dual-stage airbag standard on RS), the inflation pressure of which is controlled to match the severity of the impact, and the driver SRS knee airbag used on the Delica D:5 and Galant Fortis. SRS side and curtain airbags are available as factory-fitted options.
GSR comes standard with discharge headlights and the adaptive front lighting system (AFS), in which auxiliary lights turn in the same direction as the steering wheel to increase the area of road illuminated and improve driver visibility at night.
Rain-sensitive auto wipers that adjust wipe speed and interval to rain intensity and auto light control that monitors the intensity of peripheral light, turning the headlights on or off accordingly, are factory-fitted options on the GSR.
All models come standard with an engine immobilizer and security alarm to deter theft. (The security alarm is standard on the GSR only.)
7. Audio / Utility
The GSR trim level is available with the Mitsubishi Motors Communication System (MMCS) as a factory-fitted option which comprises a 30Gb hard disk drive audio/navigation system with 7-inch LCD screen.
Available as a factory-fitted option on the GSR is the Rockford Fosgate premium sound system — well received on the Outlander and other models. The system uses a 650-Watt amplifier and nine speakers to deliver awesome high-fidelity sound assisted by the use of acoustic and damping material to seal off openings inside the doors and turn them into speaker boxes.
Available as a factory-fitted option on the GSR is a keyless operating system that allows the driver to lock or unlock the doors and to start or stop the engine without having to take the remote unit out of pocket or handbag.
Standard on all models is the Mitsubishi Motors ETACS (Electric Time and Alarm Control System) system. The system controls the operating environment for the Comfort Flasher — a dab on the flasher stalk causes the turn signal to flash three times; very handy when changing lanes — and the headlight auto-off feature which prevents accidental drainage of the battery and other electronic systems fitted to Lancer Evolution X. The Mitsubishi Lancer was first introduced in 1973, and since that time more than six million examples have been sold. It has carried many different names, sold by different manufacturers, and come in different shapes and sizes. Since the cars inception, it has proven to be a solid competitor in rally competition. It has been a very versatile, and capable automobile.
When first introduced, it joined Mitsubishi's other models which included the Galant, their compact car, and the Minica kei car. The Lancer fell into ranks between these two models, serving as the company's lower-to-middle class vehicle. When introduced, it was offered in twelve different trim levels, included the base 1.2-liter sedan, and ranging towards the rally-prepared 1600 GSR. Two bodystyles were offered, the 2-door coupe and the 4-door sedan. There was also a five-door station wagon, but the production levels on this never reached very high. A hatchback was added in 1975, called the Mitsubishi Lancer Celeste and offered with either a 1.4- or 1.6-liter engine. A 2.0-liter unit was later added.
The second generation of the Mitsubishi Lancer was introduced in 1978 and remained in production until 1983. The only bodystyle offered was the four-door sedan; two engine sizes were available, a 1.4- and 1.8-liter four-cylinder unit. The big news for this generation was the addition of the Lancer EX, which brought with it a turbocharger for the 1.8-liter engine.
In 1982 the next generation of the Lancer was introduced. A new model was launched, dubbed the lancer Fiore and based on the Mitsubishi Mirage. This generation of the Lancer was offered in a 3-door hatchback, 4-door sedan, 5-door hatchback, and five-door station wagon. The 1.6- and 1.8-liter engines were still available. A diesel version was introduced, and fuel injected and turbocharged versions were offered.
The station wagon was added in 1985, and it was followed quickly by a four-wheel drive version.
In 1988 the next iteration of the Lancer began, and would persist until 1992. The design changed; the car became less boxy, and more aerodynamic in appearance and principle. The edges became more round and modern. The shape followed the design of the Galant.
By now, the Lancer name was being shared with the Dodge Lancer, which was being sold in the United States by Chrysler Group. In Japan, the model was known as the Mirage Aspire.
This generation of the Lancer was sold as a 3-door hatchback, four-door sedan, and 5-door hatchback. Front and four-wheel drive was available.
In 1991, the differences between the Mirage and the Lancer became even greater, though both were still built on the same platform. In the North American market, the Lancer was sold as the Eagle Summit.
A V6 engine, which displaced just 1.6-liters, was introduced and powered the Mirage, along with other Mitsubishi cars. It would even become the power source for one of the HSR Concept vehicles. This V6 engine was the smallest mass-produced V6, a title it retains to this day. Other engine options included a 1.3, 1.5, 1.8, and 1.6-liter four-cylinder engines. The 1.3 and 1.5-liter versions were SOHC while the rest were DOHC. The 1.8 was created in both SOHC and DOHC fashion. The standard gearbox was the five-speed manual, with the four-speed automatic being sold as optional equipment.
The big news was the Lancer GSR, which had a high-performance turbocharged engine and would form the groundwork for the Lancer Evolution, commonly known as the Lancer Evo, which began in September of 1993. The Evo used the drivetrain of the Galant VR-4 rally car, and would soon prove its potential as a high performance competition machine.
All of the Lancer Evolutions has shared a two-liter, turbocharged engine and four-wheel drive system. The Evolutions, prior to version V, are the officially-approved models for Mitsubishi's efforts in the World Rally Championship's Group A class and SCCA Pro Rally Championship. The cars are built on the same platform as the other Lancers, but given many performance upgrades and mechanical improvements.
Lancer Evolutions continue to race in Group A and Group N classes.
The seventh generation of the Lancer was introduced in 1995 and produced until 2000. It continued the Lancers successful formula of enjoying strong sales throughout the world. In Japan, the name for the sedan and wagon continued as the Libero; related Mirage models were still available. The Coupe was known as the Mirage Asti in Japan, and the Lancer Coupe in the rest of the world.
The Mitsubishi Lancer Evolution V is the only Mitsubishi to earn the WRC Constructors Championship for its marque. Tommi Makinen has claimed four WRC Drivers Championships, from 1996 through 2000, in a Mitsubishi Lancer Evolution (IV, V & VI). Makinen has driven Mitsubishi's in most of his WRC career. The exception being a Ford Escort RS Cosworth in 1994 and a Subaru Impreza WRC in 2002.
The eight generation of the Lancer was introduced in 2000 in Japan. Most of the other markets continued with the seventh generation. The 8th gen Lancer was available in a four-door sedan configuration or as a station wagon.
Styling changes for the Lancer occurred in 2004 and 2005 for the North American market. The grille was given more fins so it was closer in design to the American version of the Galant. The facia was changed slightly again in 2006.
The Sportback and Ralliart were introduced to the US in 2004. Both of these trim levels brought more equipped and bigger engines. The Sportback has a 160 horsepower engine and the Ralliart was just a little higher, at 162. For both, the suspension had been improved, resulting in better handling and performance. The cars were lowered and 16-inch alloy wheels could now be found on all four corners. Aerodynamic ground package, fog lamps, and front bucket seats completed the ensemble. The Ralliart was given clear rear tail lights and a rear deck spoiler, which did little except enhance the cars appearance. All Sportbacks were equipped with an INVECS-II automatic gearbox. The Ralliart had the five-speed manual as standard and the four-speed automatic as optional.
Slow sales and financial difficulties for Mitsubishi had the Sportback canceled after just one year.
The Mitsubishi Concept X was unveiled to the public at the 2005 Tokyo Motor Show; Concept-Sportback was shown a little while later at the Frankfurt Motor Show. The new lancer drew its design inspiration from both of these concepts, which was officially unveiled at the 2007 Detroit Motor Show. Sales for this generation of vehicle went on sale in the US in March of 2007. it is available as a four-door sedan.
Source - Mansory LE MANSORY, the limited edition of the widebody customization components. The word combination MANSORY and the famous french racetrack Le Mans are building the title of this modification range. And with the popular 24 hours race event coeval the limited quantity of 24 sets is figured out based on your Bentley Continental GT. A complete new front spoiler integrated with state of the art LED permanent daylights, extrem air intakes and so on the striking carbonfibre elements gives the bolide a true bred racing car trait.
The side skirts and the fender attachments express clearly the motoring appearance and honours the widebody definition. Likewise the front there are large air intakes and carbonfibre elements which supporting the sporty impression. The complete redesigned rear skirt with the rear trunk spoiler incorporates the double quad chromium plated stainless steel exhaust system which makes the vehicle unforgettable and the sport air filters and the sportcatalysor completed system will give a sonouros dominating unique sound. With the MANSORY electronic engineering package the performance grows up to 641bhp, 650PS, 478 kW at 6100rpm on to a top speed of 205 mph or 330 km/h evolving in a gigantic peak torque of 780 Nm, 575 lb ft by only 1.600 rpm. The acceleration is 0 - 100km/h 4.6 seconds respectively 0 - 60mph/h 4.4 seconds. To restrain this amazing power performance, there is the special developed brake system with MANSORY's high end co-operation partner BREMBO. Dimensions of the systems are 412/38 rotor discs with 6 piston aluminium fixed calipers in front and disc dimensions 405/22 with 4 piston calibers for the rear with the integrated electronical handbrake.
In combination with the absolutly lightweight fully forged wheels in size 10 x 22J with 265/35/22 high performance profile tyres and 10 x 22J with 305/30/22 tyres contribute to a sporty appearance supported to the e-lowering suspension system up to 30mm. Genuine carbonfibre trim inserts, sport steering wheel in combination Leather/Carbon, real carbonfibre 4-parts engine cover are more detailed racy highlights.
More inside wafer and perforated finest leather works and Alcantara, illuminated sill plates in stainless steel with a lighted LE MANSORY Logo, high polished. Foot deposite pedals 3-parts like accelerate pedal, brake- and restpedal in stainless steel high polished punched. Floor mats for the foot area with LE MANSORY logo stick with leather border, everything selectable in special trendy colors for example shown here in black/orange. Accelerate with us and be one of the 24 individualists with this limited modification program for your Bentley Continental GT.
MANSORY as a company is dedicated to perfection in the form of high end tuning and individualisation to match the lifestyle of the owners of British noble automobiles like Aston Martin, Bentley and Rolls Royce. The headquarter is situated in Brand, Fichtelgebirge near to Bayreuth, Germany.
The MANSORY Cooperation GmbH only offers their own developed tuning-accessories exclusively, we don't sell complete automobiles.
Two new Special Editions join the DBS in Frankfurt
Aston Martin is not only showing the DBS for the first time in Europe at the Frankfurt Motor Show next week but will also showcase two new special editions – the Aston Martin DB9 LM and the V8 Vantage N400. Both special editions draw inspiration from the company's recent achievements at Le Mans and the N?rburgring 24-hour races.
The V8 Vantage N400 commemorates Aston Martin's achievements at the N?rburgring where the company enjoyed success in the gruelling ADAC 24-hour race with the V8 Vantage N24 production race car. Aston Martin develops and tests all of its road cars extensively on the N?rburgring Nordschleife circuit and the Vantage N400 recently broke the eight minute benchmark around the legendary 14-mile circuit.
The Vantage N400 includes a number of technical improvements as well as enhancements to the car's standard range of renowned colour and trim specifications. These include a power upgrade to Aston Martin's 4.3 litre V8 engine, lifting peak power to 400bhp and peak torque to 420Nm. The car also comes equipped with a new Sports Pack which offers subtly different driving dynamics tailored to enthusiasts who seek even more responsive handling. The Sports Pack comprises a unique lightweight graphite-finished aluminium wheel with diamond turning, up-rated springs and dampers and a new rear anti-roll bar (for the Coupe). The Vantage N400 also includes a number of exterior design changes, including a revised side sill design, Magnum Silver bonnet and side strake meshes, clear rear lamp lenses and a bright finish grille.
Interior enhancements include perforated black leather seats, micro-spin alloy facia trim and a unique numbered sill plaque. The Vantage N400 will be available in three new exterior colours; Bergwerk Black, Lightning Silver or Karussell Orange, with either Sportshift automated manual or conventional manual transmission and in either Coupe or Roadster forms. Additionally, the Vantage N400 comes equipped with a range of normally optional equipment, including Satellite Navigation, 700W Aston Martin Premium Audio System, Bluetooth telephone preparation, HID headlamps, cruise control and memory/heated seats.
The DB9 LM celebrates Aston Martin's GT1 class victory in the Le Mans 24-hour endurance classic in June with the DBR9 – a race car derived from the DB9.
This special edition car, available in Coupe form only with Touchtronic transmission, includes a unique Sarthe Silver exterior paint finish, meshes and rear crossbar finished in Magnum Silver and red brake callipers. Inside, the DB9 LM is fitted with handcrafted black leather finish, perforated leather inserts, unique 'Tertre Rouge' facia trim and numbered sill plaque. The car is also equipped with the normally optional DB9 Sports Pack as standard, with colour keyed and diamond turned alloy wheels.
Pricing details for both cars will be confirmed at the Frankfurt motor show.
Two new Special Editions join the DBS in Frankfurt
Aston Martin is not only showing the DBS for the first time in Europe at the Frankfurt Motor Show next week but will also showcase two new special editions – the Aston Martin DB9 LM and the V8 Vantage N400. Both special editions draw inspiration from the company's recent achievements at Le Mans and the N?rburgring 24-hour races.
The V8 Vantage N400 commemorates Aston Martin's achievements at the N?rburgring where the company enjoyed success in the gruelling ADAC 24-hour race with the V8 Vantage N24 production race car. Aston Martin develops and tests all of its road cars extensively on the N?rburgring Nordschleife circuit and the Vantage N400 recently broke the eight minute benchmark around the legendary 14-mile circuit.
The Vantage N400 includes a number of technical improvements as well as enhancements to the car's standard range of renowned colour and trim specifications. These include a power upgrade to Aston Martin's 4.3 litre V8 engine, lifting peak power to 400bhp and peak torque to 420Nm. The car also comes equipped with a new Sports Pack which offers subtly different driving dynamics tailored to enthusiasts who seek even more responsive handling. The Sports Pack comprises a unique lightweight graphite-finished aluminium wheel with diamond turning, up-rated springs and dampers and a new rear anti-roll bar (for the Coupe). The Vantage N400 also includes a number of exterior design changes, including a revised side sill design, Magnum Silver bonnet and side strake meshes, clear rear lamp lenses and a bright finish grille.
Interior enhancements include perforated black leather seats, micro-spin alloy facia trim and a unique numbered sill plaque. The Vantage N400 will be available in three new exterior colours; Bergwerk Black, Lightning Silver or Karussell Orange, with either Sportshift automated manual or conventional manual transmission and in either Coupe or Roadster forms. Additionally, the Vantage N400 comes equipped with a range of normally optional equipment, including Satellite Navigation, 700W Aston Martin Premium Audio System, Bluetooth telephone preparation, HID headlamps, cruise control and memory/heated seats.
The DB9 LM celebrates Aston Martin's GT1 class victory in the Le Mans 24-hour endurance classic in June with the DBR9 – a race car derived from the DB9.
This special edition car, available in Coupe form only with Touchtronic transmission, includes a unique Sarthe Silver exterior paint finish, meshes and rear crossbar finished in Magnum Silver and red brake callipers. Inside, the DB9 LM is fitted with handcrafted black leather finish, perforated leather inserts, unique 'Tertre Rouge' facia trim and numbered sill plaque. The car is also equipped with the normally optional DB9 Sports Pack as standard, with colour keyed and diamond turned alloy wheels.
Pricing details for both cars will be confirmed at the Frankfurt motor show.
The redesigned Chevrolet Malibu is based on GM's global midsize platform, which serves as the foundation for a strong body structure, precise build quality and refined driving dynamics. It is more than three inches (76 mm) longer than the current model, with a six-inch-longer (162 mm) wheelbase. These proportions create a wheels-at-the-corners stance that enables a smoother, more direct driving experience.
Performance comes from a family of powerful dual-overhead cam four- and six-cylinder engines, including a 2.4L Ecotec DOHC four-cylinder engine and a 3.6L DOHC V-6 with variable valve timing. A six-speed automatic transmission is standard with the V-6 and is offered with the 2.4L four-cylinder – a segment first.
Here's a look at Malibu's features in detail:
Driving experience
Malibu's long, 112.3-inch (2,852 mm) wheelbase and wheels-at-the corner stance enable sharp, responsive ride and handling characteristics that bring a trait that's rare to the segment: driving satisfaction. The balanced, four-wheel independent suspension system features a MacPherson strut front suspension design and multilink rear suspension. The front suspension uses aluminum control arms, which reduce unsprung mass impacts over bumps for a smoother ride. A direct-acting stabilizer bar provides a more immediate feel to steering inputs.
The rear suspension also features a direct-acting stabilizer bar, as well as monotube or twin-tube shock absorbers, depending on the model. The front and rear suspension systems are tuned for each powertrain combination, delivering tailored driving characteristics for all models. Hydraulic ride bushings and body control damping measures enhance the connected-to-the-road driving feel while supporting a comfortable ride.
GM's StabiliTrak electronic stability control system is standard on LT and LTZ models. It uses sophisticated vehicle sensors tied to the anti-lock braking system to help the driver maintain control during certain maneuvers. The new panic brake assistance feature provides full braking power when a panic-braking event is detected. This can reduce the braking distance, providing more control in helping to avoid a crash.
Steering response is precise and immediate, thanks to tuned steering systems designed for each model. Malibu models equipped with the 2.4L engine use a variable electric power-assist steering system, while V-6 models employ a hydraulic-assisted steering system.
A family of 16-, 17- and 18-inch wheels is offered with Malibu , all tailored with a tight wheel-to-body relationship. LS models come with 16-inch painted trim wheels; LT models come with 17-inch chrome trim wheels and LTZ models are fitted with 18-inch aluminum ultra-bright-finish wheels.
The suspension systems are mounted to a robust chassis and integrated body structure that features a safety cage design and strategic placement of high-strength steel for outstanding structural integrity. The strong chassis and body structure enable more precise mounting of the suspension systems, a design trait that enabled engineers to focus on finer degrees of suspension tuning. A safety cage construction built into the Malibu's body structure is complemented with reinforced rocker sections, as well as a reinforced front body hinge pillar and roof pillars that were designed to improve impact protection. A magnesium cross-car beam unites the lower sections of the A-pillars. This not only helps protect passengers in side-impact crashes, but also serves as a solid foundation for the instrument panel. High-strength steel is used in strategic areas to augment overall structural integrity.
Powertrain
The 2.4L Ecotec DOHC four-cylinder engine is rated at 164 horsepower (122 kW)* and delivers an estimated 31 mpg in highway driving, which is projected to be as good as or better than the segment's current sales leader. It also is good enough to join the exclusive ranks of vehicles rated at 30 mpg or more – a club that will be tougher to join in 2008 because of revised EPA mileage test standards. GM has more 'members' in the 30-mpg club than any other manufacturer.
The 2.4L Ecotec DOHC will be offered with all trim levels. LS and LT models are backed by a Hydra-Matic four-speed automatic transmission. Malibu LTZ models with the 2.4L engine are equipped with a new Hydra-Matic 6T40 six-speed automatic – the only four-cylinder/six-speed automatic combination in the segment.
The available 3.6L V-6 VVT is a sophisticated, all-aluminum DOHC engine that uses variable valve technology to produce 252 horsepower (188 kW)** while delivering an estimated 26 mpg in highway driving. It is mated with a Hydra-Matic 6T70 six-speed automatic transmission.
The Malibu's six-speed transmissions enable a strong balance between performance and fuel efficiency, with the six forward gears offering optimized performance at all rpm levels, as well as reduced rpm at highway cruising speeds. Lower rpm can enhance fuel economy and reduce cabin noise. The six-speed transmissions also feature Driver Shift Control (DSC), which enables the driver to shift manually with steering wheel-mounted controls.
All Malibu powertrain combinations are supported with GM's five-year/100,000-mile powertrain warranty.
Quiet, thoughtful environment
Malibu's strong structure serves as the foundation for an exceptionally quiet environment. Along with the robust chassis, which minimizes vibration and noise, the body structure uses noise-reducing materials, such as liquid spray-on sound deadener, laminated steel and composite wheel liners, to deliver one the segment's quietest, most refined driving experiences. Laminated 'quiet glass' also contributes to a quiet environment.
The interior's attention to detail complements the quieting features, with an ergonomic design using materials that convey quality and value, including a cast skin material on the instrument panel. For the first time, the Malibu is offered with two-tone trim combinations, including Ebony and Brick, Cocoa and Cashmere and Titanium and Cashmere . There is also an all-Ebony combination, accented with a distinctive wood grain element that offers a unique, upscale appearance. LTZ models receive distinctive, black-chrome accents, a specific instrument layout and unique, two-tone leather seating surfaces.
Ambient lighting in areas such as the overhead console and door-pull pockets enhances the Malibu's inviting feel. The overhead console-mounted LED floodlights provide subdued lighting to the center console area between the front seats. A feeling of openness is enhanced with Malibu's available, panoramic sunroof, featuring four sliding panels that provide an opening that extends between the front and rear seats. The retractable glass panels tilt upward, so there is no loss of headroom inside the car.
OnStar
All 2008 Malibu models come with OnStar Gen 7, which features standard automatic crash notification service and OnStar Turn-by-Turn Navigation. It is the first factory-installed, fully integrated GPS navigation system from OnStar. Turn-by-Turn allows consumers to talk to a live adviser, who in turn sends complete step-by-step directions to customers' vehicles through their OnStar system. These audio directions automatically play through the vehicle's stereo as needed, triggered by the OnStar system's GPS capabilities. This enables drivers to be guided to their destination while keeping their hands on the wheel and their eyes on the road. Named for Malibu, California, the Malibu name has had a distinct history that began in 1963 and continued for nearly 20 years. Following a thirteen-year break, the Chevy Malibu name once again appeared in 1996, and again in 2003 as the latest generation was presented.
The name Malibu was originally utilized as the description for Chevrolet's top series models in the Chevelle line in 1964. This line continued all the way up to the 1983 model year. A mid-sized vehicle, the Malibu is produced in the United States by General Motors. Attempting to stay smaller than the full-size Impala model, the Malibu is marketed in the U.S., Mexico, Canada and Israel.
1964 was the original production year of the Chevelle Malibu. Production continued until 1972 and the Malibu was restyled for the 73 model year. The lineup included the base Chevelle Deluxe, mid-range Malibu and the top-line Laguna. The Deluxe was dropped in 1974 and the Malibu took the place as the entry-level Chevelle. The Malibu classic also replaced the Laguna trim package. Continuing until 197, the SS was introduced and replaced the Laguna S-3 model.
Except the Monte Carlo coupe, the Malibu name replaced the Chevelle name on all mid-sized Chevrolets for the 1978 model year. As this was the down-sized version in comparison to previous mid-sized Chevrolets, only two trim levels were available, Malibu and Malibu Classic. A total of three body-styles were introduced, the station wagon, coupe and sedan. In 1981, the two-door coupe, which was mnemonic of the 1964 Chevelle hardtop was last produced. Today this coupe has been a highly sought after collector item for drag racers.
Filling the void for mid-sized police vehicles, once the Chevrolet Nova ended production, the 9C1 police option was transferred to the 4-door Malibu line. A special order of Malibu sedans was also produced in 1981 by GM Canada, though this was eventually rejected due to quality concerns. These Malibu's were considered undesirable with the combination of the smallest V6 engine and a 3-speed manual transmission and the 'Iraqui Taxi's' were auctioned off to the public at an extremely reduced rate.
The final year that a Malibu Classic was marketed, the 82 Malibu shared GM's re-designated rear-wheel drive G platform with the Pontiac Grand Prix and the Oldsmobile Cutlass. Before being replaced by the front-wheel drive Chevrolet Celebrity, 4-door sedan Malibu's were produced until 1983. The El Camino continued to be produced in 1987 though the sedan and wagon were soon phased out.
For 1997, the Malibu was named Motor Trend magazine's Car of the Year. In the same year and an all new front-wheel drive Malibu built on an extended wheelbase version of the GM N platform was introduced. The Malibu shared the N platform the with Pontiac Grand Am, Buick Skylark, Oldsmobile Alero and Achieva and was produced at the Oklahoma City Assembly plant and the Wilmington Assembly plant. Production was eventually moved to Lansing, Michigan.
Before the Oldsmobile Alero, the Oldsmobile Cutlass was a clone of the Malibu as a stopgap vehicle and replaced the Chevy Corsica. Falling between the Cavalier and the Lumina in the Chevrolet lineup, the Malibu has taken the place of the now discontinued Corsica. A high level of standard equipment is found in the Malibu, and due to the competitive nature of midsize sedan market, the price is highly aggressive.
An all-new, front-wheel-drive midsize sedan was introduced in 1997 for the model year.
Emphasized body edges are showcased in the present series, which is a mid-sized, 5-seat sedan that is constructed on the Epsilon chassis designed in Germany also used in the Opel Vectra and Saab 9-3.
Malibu's were designed with a front grille with the Malibu logo in silver in the center from 97 to 99. The blue Chevrolet emblem on the front grille was placed on the 2000 to 2003 models. In 2000, the 3.1 L V6 was updated with 170 hp while the 4-cylinder was dropped. The 4-cylinder was reintroduced in 2004, while the N-body Malibu/Chevrolet Classic continued in production until 05.
In 2008, the Malibu is scheduled to be redesigned and built on the long-wheelbase Epsilon platform before being released to the public.
Source - Porsche
